Jump to content

Dixie Narco


gcobio

Recommended Posts

As AZ asked, will need to know wide or narrow column AND if you have it set up 2 or 3 deep. I have one set up 2 deep and one 3 deep.... the wide column requires 3 shims per side to vend 2 deep and 2 per side to vend 3 deep reliably.

 

Recently I had one acting strange, reached up and there was a busted rod on whatever that thing is called that rocks back and forth nesting the cans. Drilled and pinned, all is OK.

Link to comment
Share on other sites

As AZ asked, will need to know wide or narrow column AND if you have it set up 2 or 3 deep. I have one set up 2 deep and one 3 deep.... the wide column requires 3 shims per side to vend 2 deep and 2 per side to vend 3 deep reliably.

 

Recently I had one acting strange, reached up and there was a busted rod on whatever that thing is called that rocks back and forth nesting the cans. Drilled and pinned, all is OK.

Be careful about giving out advice until you know the model of machine, Jamman.  The column setup will depend on whether the machine can handle three cans deep or only two.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...