nrod7 Posted October 6, 2015 Share Posted October 6, 2015 Is the Dixie Narco 368/CC 1 S2-7, capable of vending 16 oz. Monsters? If so, what must I change (shims, cam, back spacer) to vend 2 deep in a single column? What changes if 2 deep in the double column? Thanks, nrod7 Link to comment Share on other sites More sharing options...
CajunCandy Posted October 6, 2015 Share Posted October 6, 2015 A 368 can machine is not deep enough to vend two deep. A three deep multi-price machine can vend monsters two deep. It depends on what machine your trying to use for shims and settings. cajun Link to comment Share on other sites More sharing options...
AZVendor Posted October 6, 2015 Share Posted October 6, 2015 You can do the Monster cans 1 deep by adjusting the motor timing cam to show only one notch for the motor switch to fall into (in a narrow column) or two notches in a wide column. Leave the shims in place that were used for 12 oz cans and then pull the rear spacer forward so that there is 1/2" between the front of the can and the sold out paddle when the rear spacer is straight and flush top and bottom, right and left. Just remember that if you don't have a multiprice machine you're stuck at only one price for the whole machine. Link to comment Share on other sites More sharing options...
nrod7 Posted October 6, 2015 Author Share Posted October 6, 2015 O.k. Thanks, nrod7 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.