Jump to content

Vendo 721


laip51

Recommended Posts

Infrequent intermittent vend problem.  Accepts dollar...registers dollar...no vend and display returns to 00.  Insert another dollar and vends ok and returns to 00.  No return of any change. Happens on different selections.  I have searched the Forum but no similar complaints.

Link to comment
Share on other sites

This is probably related to the vend sensor or logic board.  If the delivery chute sensor LED is always on then you need to replace the sensor.  If the LED is always on and before replacing the sensor though, unplug the sensors from the logic board and see if the LED still stays on.  If it does and the sensors are unplugged from the board then the logic board is bad. 

 

Another cause would be a premature vend detection.  Tap on the delivery chute while watching the LED on the logic board.  If the LED doesn't flash when you tap on the chute or the LED is always on then replace the chute sensor.

 

Let me know if you need parts for this.

Link to comment
Share on other sites

So AZ, their is no adjustment on Vendo like a Royal?

 

Must be replace?

 

Board or sensor.

 

 

cajun

That's correct, the Vendo has no adjustment. One last thong to check is to make sure the delivery chute is properly installed, not vibrating, and no extra bottles or cans under it.

Link to comment
Share on other sites

Found the problem.  Changed acceptor...no help.  Coins worked ok.  Finally found one column had a crushed can with swollen bottom.  Removed and reloaded and all ok. Not familiar with any microorganism that produces  gas at refrigerator temp.  Can't explain the intermittent nature of working right most of the time, or how jam should affect other columns?  Thanks to all for your suggestions.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...