dannie Posted October 14, 2015 Share Posted October 14, 2015 Hello, Im just getting back into the vending business after alittle break. Ive put out a automatic products snack machine and im having an issue with the dollar bill acceptor. After about 4-5 vends it quits taking dollar bills, If you reset the machine it starts working again. All of the coin slots are full. Any idea what this could be or how I could fix it? Thanks so much. Link to comment Share on other sites More sharing options...
AZVendor Posted October 14, 2015 Share Posted October 14, 2015 Could you please tell us the model of the machine and the model of the bill validator? That's the only way to help you diagnose this. Link to comment Share on other sites More sharing options...
dannie Posted October 14, 2015 Author Share Posted October 14, 2015 Its an Automatic products snack, with a mei bill validator Link to comment Share on other sites More sharing options...
AngryChris Posted October 14, 2015 Share Posted October 14, 2015 What model AP and what model MEI validator Link to comment Share on other sites More sharing options...
dannie Posted October 23, 2015 Author Share Posted October 23, 2015 Sorry for the delay. its an automatic products snackshop with a MEI series 2000 bill validator. I've replaced the validator and coin mech and its still doing the same thing. What settings should the little switches be on the side? It has a blue label if that matters. Thanks so much for any help. Link to comment Share on other sites More sharing options...
CajunCandy Posted October 23, 2015 Share Posted October 23, 2015 Inside machine should be a plate. It could be upper left or upper right. Model number is on there, or simply take a good clear picture of machine and post it. Once you post model number some one on this site can help you. cajun Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.