maestro489 Posted October 20, 2015 Share Posted October 20, 2015 While replacing a compressor and a royal I unplugged too many things. And now I can't get them plugged back into the correct spots. Does anybody have a picture of what the wiring should look like on A royal 650 Merlin? Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
maestro489 Posted October 20, 2015 Author Share Posted October 20, 2015 Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
AZVendor Posted October 20, 2015 Share Posted October 20, 2015 The two terminals in the front by themselves need to have the enable wires from the logic board plugged in there. Then the two compressor wires will be plugged in on one side or the other of the other end. You definitely got carried away with unplugging things. Link to comment Share on other sites More sharing options...
CajunCandy Posted October 20, 2015 Share Posted October 20, 2015 I always take pictures of wire where they plug into before I even attempt to do service or maintenance a machine. cajun Link to comment Share on other sites More sharing options...
maestro489 Posted October 20, 2015 Author Share Posted October 20, 2015 Yes I definitely should have taken pictures. And I didn't even need to unplug those. I was in a hurry and not thinking. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
lacanteen Posted October 21, 2015 Share Posted October 21, 2015 Here's one with an older relay, but the red & white to the relay go on the 2 terminals by themselves. The outputs should be marked 1, and 2. The 2 wires going to the refrigeration unit will go on either pair: 1 or 2. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.