putrevus Posted October 23, 2015 Share Posted October 23, 2015 what would be a good price for AMS 39 snack machine refurbished. is 2200 with CC reader and mei validator ok. Thanks Link to comment Share on other sites More sharing options...
lacanteen Posted October 23, 2015 Share Posted October 23, 2015 Only if it's a Sensit-3 Link to comment Share on other sites More sharing options...
SchligVend Posted October 25, 2015 Share Posted October 25, 2015 What if it's sensit 2 Sent from my LG-H810 using Tapatalk Link to comment Share on other sites More sharing options...
rmorris1953 Posted October 25, 2015 Share Posted October 25, 2015 Sensit 2 is ok but 3 is better. No sensit 1's unless it is cheap cheap. Will have to be upgraded in near future and will cost about $600. Sent from my SM-N920P using Tapatalk Link to comment Share on other sites More sharing options...
Walta Posted October 25, 2015 Share Posted October 25, 2015 A lot of the old Sensit 1 had the boards replaced with the newer boards so they look like Sensit 2 and 3 But it lacks the switches on every motors and the wiring to use the switches. Without the switches the motors stop when a product falls thru the sensor. Every spiral will be pointed in a different direction and if someone shakes the machine something will fall off a shelf 90% of the time. At some locations it becomes a game to shake the machine for a free snack. Walta Link to comment Share on other sites More sharing options...
AZVendor Posted October 25, 2015 Share Posted October 25, 2015 The Sensit 2 gets you much more reliable drop sensors. The Sensit 3 allows monitoring of motor switches, if the machine is a real Sensit 3. Link to comment Share on other sites More sharing options...
putrevus Posted October 25, 2015 Author Share Posted October 25, 2015 The Sensit 2 gets you much more reliable drop sensors. The Sensit 3 allows monitoring of motor switches, if the machine is a real Sensit 3.How to check if it is Sensit 3 or not.Sent from my SAMSUNG-SM-G900A using Tapatalk Link to comment Share on other sites More sharing options...
AZVendor Posted October 26, 2015 Share Posted October 26, 2015 The machine will give you a startup message when powered up. Link to comment Share on other sites More sharing options...
Walta Posted October 26, 2015 Share Posted October 26, 2015 Remove a shelf from the machine and look at the motors if it has a switch on every motor that is a good machine. To remove a shelf when the shelf is fully back in the machine, reach under the shelf and lift the back of the shelf about 1 inch and pull the shelf forward while lifted after about 6 inch you can stop lifting and pull the shelf out of the machine. You will need both hands to catch it. The late model Sensit 2 had the switches as do all the 3s. Walta Link to comment Share on other sites More sharing options...
putrevus Posted October 26, 2015 Author Share Posted October 26, 2015 Remove a shelf from the machine and look at the motors if it has a switch on every motor that is a good machine. To remove a shelf when the shelf is fully back in the machine, reach under the shelf and lift the back of the shelf about 1 inch and pull the shelf forward while lifted after about 6 inch you can stop lifting and pull the shelf out of the machine. You will need both hands to catch it. The late model Sensit 2 had the switches as do all the 3s. Walta Thanks a lot for your help. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.