Dragonbeer Posted October 24, 2015 Share Posted October 24, 2015 Have a dn100-5. Worked great until stopped vending. Changed coin mech....no go. Wondering if it's the switch between the coin mech and main wire harness...any help would be great. Link to comment Share on other sites More sharing options...
AZVendor Posted November 1, 2015 Share Posted November 1, 2015 Wow, this is an old Dixie Narco! That looks like it may be a credit hold relay and it could be bad. You should also check that all of the vend motors are at home with one motor switch arm in a timing notch on the cam and the other longer arm riding on the outside edge of the cam. If one is not like that then it's causing your problem. Post a photo of your motors with the switches so we can see if this old DN uses the triple switch cluster on the motor. I'm sure it does but I also can't remember that relay or even a DN100-5 model. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.