maestro489 Posted November 17, 2015 Share Posted November 17, 2015 I have a Mars vfm1-L1-Utcs validator in a snack machine that needs to be replaced. What are my options to upgrade here Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
AZVendor Posted November 17, 2015 Share Posted November 17, 2015 You can put an MEI 2500 in without changing the harness. Let me know if you need one and what machine it's in. Email me at rbepic4gatgmaildotcom. Link to comment Share on other sites More sharing options...
SCOTT1963 Posted November 17, 2015 Share Posted November 17, 2015 You will need a power harness but they are cheap. MEI Link to comment Share on other sites More sharing options...
maestro489 Posted November 17, 2015 Author Share Posted November 17, 2015 Is that my only option? I already have a Mars series 2000, a coinco mag50b, a coinco 32sa, and a maka nb-10L-200. Would any of these work? Sent from my iPad using Tapatalk Link to comment Share on other sites More sharing options...
AZVendor Posted November 17, 2015 Share Posted November 17, 2015 Please junk the Maka. The MEI 2500 must be 110v and a power pigtail and then it will mate to your existing harness. The Mag50B might work with a proper Coinco harness. The 32SA won't work as your harness is 110v, unless the machine can go both ways. You still didn't say what model of machine it is. Link to comment Share on other sites More sharing options...
maestro489 Posted November 18, 2015 Author Share Posted November 18, 2015 Sorry. It's a snack shop 6600 Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
AZVendor Posted November 18, 2015 Share Posted November 18, 2015 You will need the 110v MEI with a VFM (snack) bezel on it with the power pigtail. If you need any of the parts you can email me for them. Link to comment Share on other sites More sharing options...
lacanteen Posted November 18, 2015 Share Posted November 18, 2015 It will be a VN2501 that will look like this: It should NOT look like this: With this harness: Use your existing harness to controller and power board as well as the 2 existing gold mounting plates that look like this: Link to comment Share on other sites More sharing options...
SCOTT1963 Posted November 18, 2015 Share Posted November 18, 2015 lacanteen it doesn't get any more complete than that Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.