anna1661 Posted February 24, 2016 Share Posted February 24, 2016 I am looking for some much need guidance! I have a Vendo V-max soda machine that I just bought and I am having trouble changing the settings from 20oz bottles to 12oz cans! I have reset the Cam, I have installed the 3rd can clip (PN 1121704), I have the gage bar set correctly, and I still get 2 cans dispensing at one time?! Any guidance would be greatly appreciated!!! Link to comment Share on other sites More sharing options...
cvending Posted February 24, 2016 Share Posted February 24, 2016 Is this happening on every selection? Link to comment Share on other sites More sharing options...
anna1661 Posted February 24, 2016 Author Share Posted February 24, 2016 No just the one I am trying to change over. When I took the machine over there was just this one that was 20oz bottles, the rest were already 12oz cans. Link to comment Share on other sites More sharing options...
cvending Posted February 24, 2016 Share Posted February 24, 2016 Copy the setup on any of the other columns to the one you are converting. Link to comment Share on other sites More sharing options...
anna1661 Posted February 24, 2016 Author Share Posted February 24, 2016 I thought I had, but I guess I am missing something?! :/ Link to comment Share on other sites More sharing options...
AZVendor Posted February 24, 2016 Share Posted February 24, 2016 The column will need a can shim in it and the gage bar will need 2 can clips, a sleeve in the 3rd position and a rear clip in the 4th position. If you need parts you can email me at rbepic4gatgmaildotcom. Link to comment Share on other sites More sharing options...
anna1661 Posted February 24, 2016 Author Share Posted February 24, 2016 AZVendor, you wouldn't happen to have some kind of diagram that shows the proper location placement of these parts? Link to comment Share on other sites More sharing options...
AZVendor Posted February 24, 2016 Share Posted February 24, 2016 There should be a diagram on the inside of your inner door showing the position of the parts. Link to comment Share on other sites More sharing options...
Chard Posted February 26, 2016 Share Posted February 26, 2016 Also, check you gauge bar adjustment. There are three slots in front and three slots in back that the gauge bar can fit into. Sometimes the spacing can cause misvends like this. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.