nrod7 Posted February 25, 2016 Share Posted February 25, 2016 The Vendo will sometimes take the dollar bill and not dispense the 12 o.z. can. Most of the time it vends correctly. What needs to be replace in order for the machine to work correctly? I have two complaints on the same selection/column. Thanks, nrod7 Link to comment Share on other sites More sharing options...
AZVendor Posted February 25, 2016 Share Posted February 25, 2016 You don't mention if the problem occurs when using just coins but I assume it does since you say it's only one column. You either have a bad selection switch, misadjusted switch panel or a bad motor switch. If you have your buttons all vertical and they are small rectangular buttons then you probably have a switch panel that is bolted to the side of the door. The switches themselves have a bend in the end of the switch arm that the button pushes against. The switch arm might be blocking the pushbutton from moving. You can loosen the two nuts holding the panel in place and slightly move it while testing the operation of the buttons. If you can find a sweet spot where all buttons work smoothly then tighten the nuts and test all the buttons. You might also have a broken selection button that the back half of the button has broken off of. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.