laip51 Posted March 15, 2016 Share Posted March 15, 2016 I believe my DN 276 Ser# 20131004AW with SII and Mars 2000 bill acceptor is ok for credit card reader kit without further mods? If not please advise. Link to comment Share on other sites More sharing options...
AZVendor Posted March 16, 2016 Share Posted March 16, 2016 You have to have MDB devices in it so if you're not running an MDB coin mech then you have to add an MDB harness to the logic board and change out the coin mech and validator to MDB devices. Both the SII and SIID boards can be MDB. Let me know if you need a harness or other parts to do that. Link to comment Share on other sites More sharing options...
laip51 Posted March 16, 2016 Author Share Posted March 16, 2016 The appropriate harness comes with the Credit Card reader. I have never learned how to tell what acceptors and coin mechs are ok for MDB. I was aware that SIID boards are compatible. Someone told me that if the harness from the acceptor had a 6 contact plug it was ok? I am not sure that the Mars 2000 is ok? I have installed 4-5 card readers but someone has always advised me regarding the appropriate bill and coin devices. Link to comment Share on other sites More sharing options...
AZVendor Posted March 16, 2016 Share Posted March 16, 2016 MDB coin mechs have small 6 pin connectors that plug into the machine. If that's what you have then it's MDB and you only need to insert the card reader harness between the machine and the validator harness. Mars validators must be 24v or they are not MDB. Link to comment Share on other sites More sharing options...
lacanteen Posted March 16, 2016 Share Posted March 16, 2016 If it is SII-D the software has to be 381.31 or higher. If it's a SII (2-button) I doubt a card will work. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.