rmorris195301 Posted May 15, 2016 Share Posted May 15, 2016 Sometimes I get borded with the day to day. So sometimes I create more work for myself. I have had this EEC sitting around for years so my curiosity got the better of me. Brain overload if you know what I mean. I had a 3015 usi I was junking out. It had nice trayd and motors so I decided to take so I took some measurements and discovered the track and tray fits perfectly in the EEC with very little modifications. I took the wiring harness off the EEC tray. Then cutting the plug off A1 and connecting it to the usi motor. I test vended that column and the motor runs for about 2 secs. Now I have to get it to make a full revolution. Lol shouldn't be a problem. Just curious what you think. Sent from my SM-N920P using Tapatalk Link to comment Share on other sites More sharing options...
Southeast Treats Posted May 15, 2016 Share Posted May 15, 2016 It's alive!!! Link to comment Share on other sites More sharing options...
orsd Posted May 15, 2016 Share Posted May 15, 2016 Redneck entray? Link to comment Share on other sites More sharing options...
matthew0582 Posted May 16, 2016 Share Posted May 16, 2016 you need the epprom to make it work, i have 4 snack trays if you need any Link to comment Share on other sites More sharing options...
rmorris1953 Posted May 16, 2016 Share Posted May 16, 2016 This has the original control board, not the 5591 board altho the wiring harnesses all look the same and it may interchange. Doubt if I do anymore with it. I have 5 new trays with new glides and pushers. Also, have another 5591 in good condition. Just tinkering like I don't have anything else to do.Those entrays aren't cheap. Link to comment Share on other sites More sharing options...
lacanteen Posted May 16, 2016 Share Posted May 16, 2016 The fish must not be biting. Link to comment Share on other sites More sharing options...
moondog Posted May 16, 2016 Share Posted May 16, 2016 The fish must not be biting. Yep, it sounds like it's time for the Cajun to make his annual visit as Roger apparently has way too much time on his hands Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.