Apple Leisure Posted May 25, 2016 Share Posted May 25, 2016 It's a Mag 50 in a multi-price Dixie. It actually rejected the (slightly) wrinkled bill a few times, then it took the bill in but the motor kept whirring for a few seconds (like if the bill were to get stuck) then it finally stacked the bill but no credit was registered. I had this complaint a week ago or so but I assumed it was user error or the like. Today it happened to me. I was able to put another dollar in after that with proper results, and I tested it a dozen times without it happening again. So it is very occasional, but something is going on. Thanks for any ideas. Link to comment Share on other sites More sharing options...
rmorris1953 Posted May 25, 2016 Share Posted May 25, 2016 Order these from Amazon. They work great. Run them in and out about 30 times to clean the belts and head. They simulate a bill and will pull in all the way. If it doesn't work you will have to have validator repaired. Link to comment Share on other sites More sharing options...
Apple Leisure Posted May 25, 2016 Author Share Posted May 25, 2016 Morris, the belts are fine. The validator is only a few months old. Thank you though. Link to comment Share on other sites More sharing options...
rmorris1953 Posted May 25, 2016 Share Posted May 25, 2016 Morris, the belts are fine. The validator is only a few months old. Thank you though. That doesn't matter if it is a dirty greasy environment, dusty, hair salon, or machine shop. Belts aren't always changed when the validator is serviced. Link to comment Share on other sites More sharing options...
AngryChris Posted May 26, 2016 Share Posted May 26, 2016 The mag50 is certainly not a few months old. Rather, it was probably refurbished a few months ago. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.