AngryChris Posted May 31, 2016 Share Posted May 31, 2016 Several problems on a 501T, all intermittent. First, a couple selections dry vend or double vend. The brakes look okay. Second, one selection vends when it isn't supposed to sometimes. I'm thinking I need some switches. Link to comment Share on other sites More sharing options...
rmorris1953 Posted May 31, 2016 Share Posted May 31, 2016 Are you vending cans? The can shims on the first ones that came out had a third notch at the back of the shim wich would cause the 3rd vend to jam. Most of the time it would jam. To prevent it you need to grind about a 1/16 to 1/18" off making it even with the second notch. Rotor could be worn and not completing the rotation. A sticky switch could be letting the cam go to far. Link to comment Share on other sites More sharing options...
AngryChris Posted June 1, 2016 Author Share Posted June 1, 2016 Yes, they are cans Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.