AngryChris Posted June 12, 2016 Share Posted June 12, 2016 I have a Hamilton changer with a buck passer (something like that) validator inside. Should I scrap this? I've seen an update kit but I don't see where I would really need this. It worked great until it stopped pulling bills inside. Link to comment Share on other sites More sharing options...
Golfdogs Posted June 13, 2016 Share Posted June 13, 2016 I've got a couple of Rowe changers with the buck passer. I'm thinking they are scrap. Link to comment Share on other sites More sharing options...
AZVendor Posted June 13, 2016 Share Posted June 13, 2016 Rowe changers didn't use the Buckpasser, that was Hamilton only. You probably have BA35 or BA50 transport heads in Rowe changers. There are likely no parts for the Hamiltons any longer. If you need a bill changer for a location Chris, I have some later model Rowes if you need one. Otherwise it's time to validate all the machines. Link to comment Share on other sites More sharing options...
AngryChris Posted June 13, 2016 Author Share Posted June 13, 2016 Rowe changers didn't use the Buckpasser, that was Hamilton only. You probably have BA35 or BA50 transport heads in Rowe changers. There are likely no parts for the Hamiltons any longer. If you need a bill changer for a location Chris, I have some later model Rowes if you need one. Otherwise it's time to validate all the machines. I'll keep that in mind about the Rowe changers Randy. The changer is literally just sitting around unused. I'll go ahead and put it out for the scrappers to pick up. Link to comment Share on other sites More sharing options...
Golfdogs Posted June 13, 2016 Share Posted June 13, 2016 Rowe changers didn't use the Buckpasser, that was Hamilton only. You probably have BA35 or BA50 transport heads in Rowe changers. There are likely no parts for the Hamiltons any longer. If you need a bill changer for a location Chris, I have some later model Rowes if you need one. Otherwise it's time to validate all the machines. Double checked this morning...my Rowe changers with the double rotating coin buckets use the 'Buckpasser II' bill acceptor. Link to comment Share on other sites More sharing options...
lacanteen Posted June 13, 2016 Share Posted June 13, 2016 Double checked this morning...my Rowe changers with the double rotating coin buckets use the 'Buckpasser II' bill acceptor. Anything with "Buckpasser" isn't Rowe. Rotating buckets is NRI (National) and the same classification as Hamilton: Junk Link to comment Share on other sites More sharing options...
Walta Posted June 13, 2016 Share Posted June 13, 2016 I would like to see photos of this Rowe changer and model number tag. Rowe did make a slide tray BA I never saw one the scraper had them by 1980. It would look like a buck passer. That model was replaced with the BC8 about 1970. Walta Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.