orsd Posted August 25, 2016 Share Posted August 25, 2016 My DN 368 MC will take money, but it won't vend any selection anymore after I replaced the switches for ones out of a vandalized DN501ER. I tested the switches with a multimeter and they checked out. The machine vended before the swap so the Coin mech is fine, and I can hear the relay click after I put correct money in. I followed the manual and it didn't help. Any ideas? Link to comment Share on other sites More sharing options...
AZVendor Posted August 25, 2016 Share Posted August 25, 2016 You might have miswired one or more select switches. One open can prevent continuity through the whole selection panel. Follow your wiring diagram on the inner door and see if you missed something. Why did you replace the switches? Link to comment Share on other sites More sharing options...
orsd Posted August 25, 2016 Author Share Posted August 25, 2016 NC of switch 8 has continuity to COM of switch 1. A couple of the switches were bad and some were intermittent so I decided to replace them all while it was in the shop. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.