vender4321 Posted September 12, 2016 Share Posted September 12, 2016 Hi all, I just picked up this machine about 4 years old. I am having issues vending some products (larger bags etc). Things get stuck and don't fall. Any one have this machines and any advice on how to load it, settings etc to make sure stuff falls. The coil only makes 1 turn (no ivend sensor). Thanks Link to comment Share on other sites More sharing options...
AZVendor Posted September 12, 2016 Share Posted September 12, 2016 The spiral should only make one turn and the product should drop during that turn. If it doesn't then either your bags are too large for the spiral or you have it loaded incorrectly. The bags should fit with the bottom of the bag tucked into the spiral so the full bottom edge rests on the shelf itself. This gives the full circumference of the spiral a chance to push the bag off. If you can't tuck the back into the spiral that way then your spiral is too small. If you need a larger spiral you can email me at rbepic4gatgmaildotcom. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.