cdreed06 Posted September 27, 2016 Share Posted September 27, 2016 Recently bought 2 National Snacktron 4 wide machines, both working good. I want to replace the MAKA bill acceptors and the National coin acceptors. Is there anything that will work? Thanks Link to comment Share on other sites More sharing options...
AZVendor Posted September 27, 2016 Share Posted September 27, 2016 Email me at rbepic4gatgmaildotcom and I can send you replacements. Link to comment Share on other sites More sharing options...
cdreed06 Posted September 27, 2016 Author Share Posted September 27, 2016 The Maka and the national are working fine, but would rather use a better unit. Is there a Mars that will work? Link to comment Share on other sites More sharing options...
lacanteen Posted September 27, 2016 Share Posted September 27, 2016 It ain't fun, but it can be done. Conversion harness to start. Link to comment Share on other sites More sharing options...
AngryChris Posted September 28, 2016 Share Posted September 28, 2016 If these are National 145's, then you need a conversion harness at the minimum. In addition to that, depending on the board, you may also need a new validator interface board. On a few machines of mine, I had to invest approximately $100 between the interface board, harness, and hardware (bracket). You also need the VN 2511 (I think it's a bottle bezel that you want). Link to comment Share on other sites More sharing options...
cdreed06 Posted September 30, 2016 Author Share Posted September 30, 2016 Thank you everybody. The MAKA quit working now so I have to get something going on this machine. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.