Icisnerosjr Posted October 20, 2016 Share Posted October 20, 2016 Recently my snack machine began to read " Exact Change Only" checked my bill acceptor and it is flashing twice the magazine says "disabled from mech vmc" coin tubes are full, any suggestions on how to fix this issue? Link to comment Share on other sites More sharing options...
AngryChris Posted October 20, 2016 Share Posted October 20, 2016 The most likely issue is that something is wrong with the coin mech. Verify that it works and it's NOT low on coins (at least 12 nickels, dimes, and quarters). See if it takes change and see if you can pay out all denominations of coins from the control board. If all of these seem to work (machine takes change and dispenses change) then I would assume that your low tube sensor is bad on one or more of your tubes. If you have a 9302-L or equivalent coin mech available, simply swap it out and see if it fixes the problem. Exact change only error is almost always coin-mech related. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.