Southeast Treats Posted October 25, 2016 Share Posted October 25, 2016 Among my many working antiques, I have a snack machine with a USA Upstacker / DixieNarco validator, with a 12 pin connector on the harness. Is there an upgrade cable/kit for this validator, or am I shopping for a newer snack machine this week? It's in a Snackshop II I believe.... Link to comment Share on other sites More sharing options...
Snickers Posted October 25, 2016 Share Posted October 25, 2016 You can use a Mars VN Validator that has the VFM1 bezel. I believe you will need a harness if you don't have one already. Link to comment Share on other sites More sharing options...
AZVendor Posted October 25, 2016 Share Posted October 25, 2016 Email me at rbepic4gatgmaildotcom for any harness you might need. Link to comment Share on other sites More sharing options...
lacanteen Posted October 25, 2016 Share Posted October 25, 2016 Do not connect a MEI VN2501 to anything that was once plugged into a USA unit. It will send 110VAC up the credit line and torpedo the MEI. I learned that lesson the expensive way 20 years ago. more details needed on your machine. An A/P SS-II was pre-1980 so it must have a kit of some kind or your model number is wrong. Link to comment Share on other sites More sharing options...
Southeast Treats Posted October 25, 2016 Author Share Posted October 25, 2016 It's on old machine for sure, and I did not copy enough data while I was on location yesterday. I did notice that turning off the main power did not shut off the power to the validator harness! I am thinking it may be cheaper to replace the machine than try to update it..... and it did have an upgrade kit with an add-on display, so no original validator.... Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.