VendingNewBe Posted January 24, 2017 Share Posted January 24, 2017 I have a dixie Narco 501e soda machine. This past weekend I was updating the price for one of the sodas. The machine went through some reset function and then gave me the error code below which I could not figure out. I tried to press the reset button with selections 1+2 and nothing happen. I unplugged the machine and turned it back-on and nothing. At one point the first narrow slot started dispensing all the cans. Can anyone provide some insight. Thanks. Link to comment Share on other sites More sharing options...
AZVendor Posted January 24, 2017 Share Posted January 24, 2017 It sounds like you performed a factory default first and then continued on to test vend a selection. That's what happens when you don't know what you're doing inside the programming. The garbled display is probably because the reset you performed accidentally put the display our of sync with the version of your logic board. There are 7 segment and 14 segment displays and your board needs to be set up to work with the display you have. Here are the display programming instructions: https://drive.google.com/file/d/0BxQh0UefF7ogZUVvTDAyWE5zRVE/view?pli=1 Once you have the display working and legible again then you will probably need to reprogram all of your prices too. This time make sure you know what you're doing so you don't perform another factory default. Link to comment Share on other sites More sharing options...
VendingNewBe Posted January 26, 2017 Author Share Posted January 26, 2017 Thank you. I am a newbie at this and just learning. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.