Gsquared18 Posted March 5, 2017 Share Posted March 5, 2017 I would like to add lighting inside the machine but I don't see a wiring harness or anywhere to connect the wiring. Are there any wires around the door that can be spliced into or a way to run a cord through the back of the machine and still stay sealed? Link to comment Share on other sites More sharing options...
allen watson Posted March 5, 2017 Share Posted March 5, 2017 I've been wondering the same thing. I was thinking about mounting a shop light with 4' tubes. Costco has the led tubes 2 for $18Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Gsquared18 Posted March 5, 2017 Author Share Posted March 5, 2017 I'm thinking a power cord could be run through the back and then siliconed but just wanted to ask the experts first. Link to comment Share on other sites More sharing options...
allen watson Posted March 5, 2017 Share Posted March 5, 2017 I'm going to remove the old ballast and use the power source that is in the door so I don't have to worry about an extension cord getting pinched in the door. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
lacanteen Posted March 5, 2017 Share Posted March 5, 2017 Whatever you do, make sure it's properly grounded. If someone gets hurt from a modification that you do, it's your butt that they sue. Link to comment Share on other sites More sharing options...
allen watson Posted March 5, 2017 Share Posted March 5, 2017 For sure lacanteen. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.