Payton Posted March 19, 2017 Posted March 19, 2017 I just purchased my first machine used recently (UTurn Terminator). I've been able to clean everything up so it is looking good except for the stand. Is there a certain paint that should be used to re-finish the stand where it has rusted?
rodney69 Posted March 20, 2017 Posted March 20, 2017 Yes, but you need to make sure all the rust is off. I have a bunch that I had prefer coated. If you need one pm message me. I didn't like how the turned out just painted.
Payton Posted March 21, 2017 Author Posted March 21, 2017 On 3/19/2017 at 9:16 PM, rodney69 said: I have a bunch that I had prefer coated. What do you mean by prefer coated?
orsd Posted March 21, 2017 Posted March 21, 2017 Rustoleum hammered. Good to go over rust, and the hammered camouflages the defects.
Payton Posted March 21, 2017 Author Posted March 21, 2017 1 minute ago, orsd said: Rustoleum hammered. Good to go over rust, and the hammered camouflages the defects. Thank you! I'll definitely give that a try.
Payton Posted March 22, 2017 Author Posted March 22, 2017 The Rustoleum ended up working pretty well.
Payton Posted March 22, 2017 Author Posted March 22, 2017 Can still see the rust spots obviously, but it looks a lot better than before.
Mary Posted March 22, 2017 Posted March 22, 2017 You can also paint the body with the yellow Rustoleum. You just have to sand it with some 220 sandpaper and wipe it with a tack cloth. It looks brand new afterwards and if you use a microfiber cloth and some pledge it will shine.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.