Vending Machine Repair

[beameupscotty]

HI, Dose anybody know of a place were i could get parts for a healthy vending machine model numberHY800/850/870 one of the motors i think is shot. the flap that's supposed to be down is up i tried like hell to get this to work i am a bit puzzled by it. it was working a week ago and know this but it may not be the motor is there anybody here have or had a problem like this? OK more detail into it, The can will not dispense and there is a flap that i assume  goes back and forth to dispense the soda.So this is what i have to deal with at the time i also have another machine that's not working well i may need somebody to come and check them out. i live in on the Treasure coast { Stuart fl} is there anybody up or around this part of the world. or could somebody here help to trouble shoot this with me. As always i would like to thank everybody who has help me in the past Thank You all. Scott Saunders sugar shack vending.

[Southeast Treats]

Is that a Seaga machine?  You might try to reach them direct, but you may have better luck with Vendor's Exchange or D&S vending for parts. 

Where is the "flap"?  If it's on the front of the column it may be part of the sold out sensor paddle.  On some of those the switch can get in the wrong position in relation to the flap, and the machine will think the column is empty.  The flap is only there to give the product a larger surface to push to activate the switch. 

I am up the coast towards Daytona, I don't really know of anyone reliable in your area to do service calls, maybe someone else on here can help...

[Snoopy]

Hey, this guy does a lot of service on machines in your area, Dan, 321-231-6411, he has done well for me.  If he requires a reference tell him George from Citrus Vending sent ya.

[AZVendor]

Those machines are garbage so don't be surprised when they cause you more trouble down the road, especially for parts or support.