DN 720 Thermostat

[Javaman]

Hi

i habe a dixie narco 720 R10 pop machine tha likely needs a new thermostat as there was a fee cans frozen today at the bottom column.  Can anyone tell me where the thermostat is located on thi machine?  Is itna seperate component or is it on the logic board?  What is the repalcement part# from,dixie narco?

thanks

javaman

[lacanteen]

There is no thermostat. It's a temperature sensor and relay controlled by the board.

80492543 sensor, P-model, should be under $20

[Javaman]

Thanks,,,,so is this part off the board?  I mean a seperate part from the motherboard.  Where would it be located?

 

javaman

[AZVendor]

It's a sensor mounted to the evaporator and has a cable running back to the logic board.  Before replacing it, follow the cable back from the sensor to the board and make sure it's properly seated on the board.  It might just be loose though if the temp on the display is correct then the machine is seeing the sensor correctly.  In that case it should be replaced.