o2btanner Posted May 1, 2017 Share Posted May 1, 2017 I have an older Vendo 480 that worked fine for years. Then moved to an outside location now I fine one or two of the cams are out of aline. I check for jams, all is good. Once cams are back in position I test and all work fine, a week later same problem. What should I look for? Link to comment Share on other sites More sharing options...
AngryChris Posted May 1, 2017 Share Posted May 1, 2017 When you say the cams are out of alignment, do you mean they have changed settings or do you mean the switch arm is not in the notch? Link to comment Share on other sites More sharing options...
allen watson Posted May 1, 2017 Share Posted May 1, 2017 When you say the cams are out of alignment, do you mean they have changed settings or do you mean the switch arm is not in the notch?I think they are "coasting" past the notch. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
o2btanner Posted May 1, 2017 Author Share Posted May 1, 2017 Yes, lever is not in the notch. no cans jams. Link to comment Share on other sites More sharing options...
AZVendor Posted May 1, 2017 Share Posted May 1, 2017 Sounds like bad motors with gummed up brakes. Email me at rbepic4gatgmail if you need replacement motors. Link to comment Share on other sites More sharing options...
o2btanner Posted May 2, 2017 Author Share Posted May 2, 2017 Thanks, I'll let you know. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.