robtom Posted June 6, 2017 Share Posted June 6, 2017 Got an AP LCM 2 that I've changed from dumb mech. to MDB. Installed new wiring harness, new Mars VN 2512 US $ accepter, new Mars TRC-6512-MDB coin changer. Working with 24 v set up. Both flash disable from mech-VMC. Anyone else encountered this problem? Link to comment Share on other sites More sharing options...
AZVendor Posted June 6, 2017 Share Posted June 6, 2017 On the LCM machines there was no door switch so you need to go in and out of the service mode to do things like reset motors so you might need to do it with the new mech and validator. Link to comment Share on other sites More sharing options...
robtom Posted June 7, 2017 Author Share Posted June 7, 2017 Can you give more info on how to do this? I have went through the service mode to test motors but I see nothing for resetting. Link to comment Share on other sites More sharing options...
AngryChris Posted June 7, 2017 Share Posted June 7, 2017 Turn the main power switch off and back on. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.