sams86gn Posted June 22, 2017 Share Posted June 22, 2017 The machine was working fine at the shop. Moved it to the location and it shows "out of service" also says rar7. What could this problem be? Link to comment Share on other sites More sharing options...
AZVendor Posted June 22, 2017 Share Posted June 22, 2017 Start by unplugging the machine and reconnnecting your coin mech, validator, display, and check all harnesses for properly seated connectors on the logic board. I can't make out what your rar7 error is but the out of service message (are you sure it isn't Out of Order?) could mean you need to reset the logic board to see if it has failed. To reset the board, press the mode button for 20 seconds and then reprogram the machine - prices, STS, etc. If the out of order message returns then the board is bad. Link to comment Share on other sites More sharing options...
sams86gn Posted June 22, 2017 Author Share Posted June 22, 2017 Resetting it fixed the machine! thanks a ton AZVENDOR! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.