Snack Man 2000 Posted September 8, 2017 Share Posted September 8, 2017 Half of the motors are not working on the machine. Tested motors and they are all good. Vendnet said the white wire red stripe for ground has a bad spot. Tried jumping from selection1 to 16 and a few of the others. Nothing happened. The motor count says 7. Checked wire from door to machine and didn't see any issues. Vendnet said the only other thing is the board. Anyone else have this issue before? Link to comment Share on other sites More sharing options...
AngryChris Posted September 8, 2017 Share Posted September 8, 2017 They work when test vending?? Link to comment Share on other sites More sharing options...
Snack Man 2000 Posted September 8, 2017 Author Share Posted September 8, 2017 No, It says Err Link to comment Share on other sites More sharing options...
AngryChris Posted September 8, 2017 Share Posted September 8, 2017 So you're saying the motors are good but not in those columns? Sounds like they told you what it likely is. Maybe a pin came loose in the motor harness. Check the pins in the harness plugs. Link to comment Share on other sites More sharing options...
Snack Man 2000 Posted September 8, 2017 Author Share Posted September 8, 2017 So the last 6 selections are not working at all. I tried jumping the ground from the first to all the affected selections. Still nothing. I'm wondering if the board is bad. The tech said it is possible. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.