tlsvending Posted January 27, 2018 Share Posted January 27, 2018 Just replaced battery and rubber switch and reset all prices diagnostics are working but bottom buttons are not I am gonna try a metal shim behind plate on lower buttons when I come back any suggestions Link to comment Share on other sites More sharing options...
lacanteen Posted January 27, 2018 Share Posted January 27, 2018 9995 is not a code. It means all selections are priced at $99.95. Take it as a good sign, set your prices and see where it takes you. Link to comment Share on other sites More sharing options...
cvending Posted January 28, 2018 Share Posted January 28, 2018 Try resetting pricing again. You need to just do 1 or 2 selections. Then close door and see if the pricing holds. If so, reset the remaining prices. Link to comment Share on other sites More sharing options...
Corvus Corax Posted January 29, 2018 Share Posted January 29, 2018 Also might be the CR2032 battery. Had an AMS that would reset prices when it lost power, it was the battery. Link to comment Share on other sites More sharing options...
cvending Posted January 29, 2018 Share Posted January 29, 2018 Even if the battery is bad you should still be able to set pricing. It will be good until machine loses power, then it will default to 99.95 again Link to comment Share on other sites More sharing options...
Amigo Posted January 31, 2018 Share Posted January 31, 2018 what make and model machine is it? Royal battery sometimes come loose. Yellow block, push tight. D/N uses a watch battery you can buy locally. Link to comment Share on other sites More sharing options...
Amigo Posted January 31, 2018 Share Posted January 31, 2018 as far as the buttons put a piece of tape on the metal backing plate. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.