QuikVend Posted February 2, 2018 Share Posted February 2, 2018 Anyone know for sure if a 501e and 368 are the same width? Planning on upgrading a couple 368s at a location, but there is basically no room for anything bigger than the 368s that are there. Link to comment Share on other sites More sharing options...
savend Posted February 2, 2018 Share Posted February 2, 2018 The 501 is 2” deeper than the 368. 501 is 37” wide & 35” deep, 368 is 37” wide & 33” deep. Both 72” tall Link to comment Share on other sites More sharing options...
QuikVend Posted February 2, 2018 Author Share Posted February 2, 2018 Yea, I knew the 501e was deeper,just wasn'tpositive about width. I may end up holding off until I get a couple 276e's. They're isn't but a few mm of free space total between machines and walls. Link to comment Share on other sites More sharing options...
MNvending Posted February 2, 2018 Share Posted February 2, 2018 Can you pull the door off the machine? I’ve done it with vendos to get them in tight spots and it was well worth the effort. I have a couple 501’s but I’ve never checked the difficulty of removing the doors. I’d imagine it’s not too difficult. Link to comment Share on other sites More sharing options...
QuikVend Posted February 2, 2018 Author Share Posted February 2, 2018 If it's the same size as the 368, it will fit but will rub the wall or snack machine when the door is open or closed. The more I think about it, the more I lean towards the 276 lol. Link to comment Share on other sites More sharing options...
cvending Posted February 2, 2018 Share Posted February 2, 2018 They are the same width. If you are that tight for space you can unbolt the flange on the door to make opening easier Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.