Apple Leisure Posted February 4, 2018 Share Posted February 4, 2018 I bought the kit (and the drop sensor) but I don't seem to have instructions on how to use the new board, like setting prices etc. Is that available online? Link to comment Share on other sites More sharing options...
cvending Posted February 4, 2018 Share Posted February 4, 2018 Instructions should have come with the upgrade kit. Which board did you get? Link to comment Share on other sites More sharing options...
AZVendor Posted February 4, 2018 Share Posted February 4, 2018 Sounds like typical Vendors Exchange to me. Even when you have the instructions they don't always make any sense, especially the programming. Link to comment Share on other sites More sharing options...
AngryChris Posted February 4, 2018 Share Posted February 4, 2018 VE UCB is confusing. You MUST have the programming key to get started. It works mostly with 4 keys... scroll up, scroll down, enter, exit. Once you figure those buttons out, you can start messing around. If it IS a VE UCB, you have to hold the service mode button for 5 seconds to enter programming mode. Link to comment Share on other sites More sharing options...
Apple Leisure Posted February 5, 2018 Author Share Posted February 5, 2018 18 hours ago, cvending said: Instructions should have come with the upgrade kit. Which board did you get? I'm not sure I understand. I got it for an AP 113 but I thought they were the same for the 110 series. Link to comment Share on other sites More sharing options...
falls Posted February 5, 2018 Share Posted February 5, 2018 9 minutes ago, Apple Leisure said: 19 hours ago, cvending said: Instructions should have come with the upgrade kit. Which board did you get? I'm not sure I understand. I got it for an AP 113 but I thought they were the same for the 110 series. He means did you get the Vendors Exchange board or the InOne board. Both companies make conversion kits, but they are different in operation. Link to comment Share on other sites More sharing options...
AngryChris Posted February 5, 2018 Share Posted February 5, 2018 The AP 110 is the series, which includes the AP 111, 112, and 113. There might be some other model but I have only ever heard of those 3. But as falls said, he was asking about which kit you got aka what BRAND of board did you get? Link to comment Share on other sites More sharing options...
Apple Leisure Posted February 5, 2018 Author Share Posted February 5, 2018 I'm sorry. I got the Vendor's Exchange board. Link to comment Share on other sites More sharing options...
AngryChris Posted February 5, 2018 Share Posted February 5, 2018 http://images.veii.com/images/Manuals/UCB/UCB Programming Flowchart 3_0_0.pdf http://images.veii.com/images/Manuals/UCB/UCB_Keypad_Programming_Charts_3.0.pdf The first link is the "flow chart" which explains (poorly in my opinion) how to navigate the programming. The second link is the programming keypad chart... which allows you to figure out which keys on your keypad operate which operation. Since you are using an AP 110 series, you need to use that chart. Link to comment Share on other sites More sharing options...
Apple Leisure Posted February 5, 2018 Author Share Posted February 5, 2018 Thank you very much. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now