Jump to content

Vends tar 3000


matrixmaster79

Recommended Posts

Make sure your candy wheel is "timed" correctly. At the end of each vend there should be an open compartment directly over the candy chute. If not it results in the mis-vends that you are describing. You will need to take the canister out and look at it from underneath because the brush off housing prevents you from seeing it from the top. Manually turn the candy wheel until there is an open compartment over the hole and then put the canister back in place.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...