Snickers Posted April 21, 2018 Share Posted April 21, 2018 Got a couple National 157's off location and decided to upgrade them with the hard wired tray board kits. All is well with 1 of them but I am running into Error D on the other. All connections are checked and seated correctly. I can test vend D4,D6,D8 but when I do it turns the D0 spirals just a little. D0 and D2 will not test vend. I know there was not a problem before I put this kit on also another strange thing the Mars bill acceptor is getting #1 flash error-coins only. There was nothing wrong before. I really like these machines but working on them can be aggravating. I will fool with it again tomorrow but don't know what to do at this point besides swap known good tray board and bill acceptor and see what happens. Link to comment Share on other sites More sharing options...
Snickers Posted April 23, 2018 Author Share Posted April 23, 2018 Had one of the motor harness connectors backwards. Ugh. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.