AngryChris Posted May 6, 2018 Share Posted May 6, 2018 So i have maybe less than 10 mars 4510's out in the field and probably the same amount of 6512 or whatever the 3 tube mdb model is in the field. The 6512's usually work fine but the 4510's give me the same problems that many of us are aware of. Do you guys think i should just throw the 4510s out? Are the 6512's well supported? I prefer 7512's but i have no problem with my 9302-gx's most of the time. Link to comment Share on other sites More sharing options...
Joe101us Posted May 6, 2018 Share Posted May 6, 2018 If you throw them out send them to me I have two machines I can only get 4510 to work in no other mech will work since updating my eprom and installing a card reader Link to comment Share on other sites More sharing options...
AngryChris Posted May 6, 2018 Author Share Posted May 6, 2018 What??? A 9302gx won't work? Link to comment Share on other sites More sharing options...
Joe101us Posted May 6, 2018 Share Posted May 6, 2018 Nope tried a bunch took them outta working machines in these machines then just fall right through but then in any other machine they work Link to comment Share on other sites More sharing options...
AZVendor Posted May 6, 2018 Share Posted May 6, 2018 Your eprom f'ed up the machine then. Or did you connect the card reader wrong? The card reader plugs into the machine, the validator plugs into the card reader and the coin mech plugs into the validator. Link to comment Share on other sites More sharing options...
Joe101us Posted May 6, 2018 Share Posted May 6, 2018 I can move the eprom to another machine and the problem follows Link to comment Share on other sites More sharing options...
Corvus Corax Posted May 10, 2018 Share Posted May 10, 2018 That is a craptastic update then Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.