Magiccity726 Posted May 11, 2018 Share Posted May 11, 2018 column 12 is vending 2 sodas each vend. I am not too familiar with these machines. Everything seems to be programmed correctly. Every other column is working correctly. What could the problem be? Thank you! Link to comment Share on other sites More sharing options...
AngryChris Posted May 11, 2018 Share Posted May 11, 2018 The most likely thing is the depth is set for 1-deep and not two. Link to comment Share on other sites More sharing options...
Magiccity726 Posted May 11, 2018 Author Share Posted May 11, 2018 It’s set for 2 deep Link to comment Share on other sites More sharing options...
lacanteen Posted May 11, 2018 Share Posted May 11, 2018 Make sure the spacer rod is set in the can position. Otherwise the pawl spring may be broken. Link to comment Share on other sites More sharing options...
Snoopy Posted May 11, 2018 Share Posted May 11, 2018 Is the adjustment on the bottom of the column in the correct holes. 660's have a golden colored rod that can be placed in one of two holes (adjustable for thickness of product). With both front and back columns empty, the rod can be pulled almost all the way out and then slid back into the right holes for product size. If your info sheet is missing, just look at the other columns and copy them. 2 sets for each column and no tools needed. Link to comment Share on other sites More sharing options...
Corvus Corax Posted May 11, 2018 Share Posted May 11, 2018 If you are not doing all sodas, you can switch that out for a water bottle or a monster. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.