vender4321 Posted May 20, 2018 Share Posted May 20, 2018 Hey Guys, I am periodically getting a Y HOMING ERROR on a BevMax 4. The machine will work for a few dozen vends but then stop and the error will prohibit the elevator from functioning. I don't see any loose harnesses and the DC3 micro switch seems to be touching the bottom correctly. Any ideas? Can that micro switch be going bad slowly? What else should I look at? Thanks! Link to comment Share on other sites More sharing options...
lacanteen Posted May 20, 2018 Share Posted May 20, 2018 The switch that's on the bottom of the picker cup gets sticky a becomes sluggish. That's the one to replace. It's also possible the encoder on the Y motor is dirty or failing. Link to comment Share on other sites More sharing options...
vender4321 Posted May 20, 2018 Author Share Posted May 20, 2018 Yes thank you. I figured the micro switch is it. The switch says DC3 on it.... do you know of a good source to get new ones? Link to comment Share on other sites More sharing options...
lacanteen Posted May 20, 2018 Share Posted May 20, 2018 Here are a few sources: Part # 80410135 http://www.dsvendinginc.com/p-2165-d80410135001-dn-bevmax-346-picker-cup-home-switch.aspx http://www.veii.com/Parts-Store/Dixie-Narco/PICKER-CUP-HOME-SWITCH-LIST.html https://www.betsonparts.com/switch-r-micro-dc3a-mway.html Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.