putrevus Posted May 22, 2018 Share Posted May 22, 2018 I have BevMax with blue Bevmax 4 control board by upgraded Betson. recently it had cup problem so I replaced the cup. Yesterday got a call from location that Machine was not vending and it was returning their money. I tried to vend , it was straight going to delivery bin couple of times and giving the money back. I tried to do positioning test but I couldn't understand what it was doing , I turning it off and started it again, it was vending properly. The machine is Bevmax three but board is blue color board with Bevmax 4 on it. Any ideas what is going with the machine.Thanks for all your help. Link to comment Share on other sites More sharing options...
lacanteen Posted May 22, 2018 Share Posted May 22, 2018 Sounds like the hook swipe is set to a number that is too high. Also, check X-Axis belt tension. Link to comment Share on other sites More sharing options...
putrevus Posted May 22, 2018 Author Share Posted May 22, 2018 how do I check for hook swipe and also how do I check X-Axis belt tension. Link to comment Share on other sites More sharing options...
AngryChris Posted May 22, 2018 Share Posted May 22, 2018 If you can get a good local vending technician, this is a good job to pay them to fix it. Link to comment Share on other sites More sharing options...
putrevus Posted May 23, 2018 Author Share Posted May 23, 2018 12 hours ago, AngryChris said: If you can get a good local vending technician, this is a good job to pay them to fix it. The cup was changed by a local technician less than a month ago, now I have my doubts on how good he is? Link to comment Share on other sites More sharing options...
lacanteen Posted May 23, 2018 Share Posted May 23, 2018 There's a ton of how-to here: https://vendiscuss.net/files/file/107-dixie-narco-bev-max-2-full-update-2010/ Link to comment Share on other sites More sharing options...
putrevus Posted May 23, 2018 Author Share Posted May 23, 2018 2 minutes ago, lacanteen said: There's a ton of how-to here: https://vendiscuss.net/files/file/107-dixie-narco-bev-max-2-full-update-2010/ Thank you Link to comment Share on other sites More sharing options...
AZVendor Posted May 23, 2018 Share Posted May 23, 2018 You may also have a cup size problem. There were shorter cups on older Bev 3s which have to be replaced with taller cups as that is all you can get now. The machine has to be programmed to the cup size along with all the other programming. Your machine has to be totally programmed from scratch when a Bev 4 board is put in it. Link to comment Share on other sites More sharing options...
putrevus Posted May 23, 2018 Author Share Posted May 23, 2018 41 minutes ago, AZVendor said: You may also have a cup size problem. There were shorter cups on older Bev 3s which have to be replaced with taller cups as that is all you can get now. The machine has to be programmed to the cup size along with all the other programming. Your machine has to be totally programmed from scratch when a Bev 4 board is put in it. It was upgraded to bevmax 4 by Betson but last month we changed the cup. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.