maestro489 Posted May 22, 2018 Share Posted May 22, 2018 I've got a Rowe 5900 that isn't getting any power to the coinmech(9340L), no red light when I pull down the deck, or the validator(ba30). The machine is still getting power though. The machine chimes when you open the door and the display on the outside of the machine works. I changed out the power supply but nothing changed. Link to comment Share on other sites More sharing options...
lacanteen Posted May 22, 2018 Share Posted May 22, 2018 If I recall right, there is a breaker behind a hole on the bottom left of the cabinet. There's a hole big enough for your finger to reset it. Link to comment Share on other sites More sharing options...
AZVendor Posted May 23, 2018 Share Posted May 23, 2018 Probably a bad coin mech. If the breaker tripped then it is bad. Link to comment Share on other sites More sharing options...
maestro489 Posted May 23, 2018 Author Share Posted May 23, 2018 The breaker didn’t seem to be tripped. I pressed it a few times but it didn’t help. I examined the power supply a little more and noticed that one of the lights was out. There are four lights and the one on the far left is out. Does this mean the power supply is bad? Link to comment Share on other sites More sharing options...
AZVendor Posted May 24, 2018 Share Posted May 24, 2018 Probably. Check the manual and see what circuit it controls. Better yet, unplug the mech (with power off) and see if that restores the led. Then you'll know the mech is bad. Link to comment Share on other sites More sharing options...
maestro489 Posted May 24, 2018 Author Share Posted May 24, 2018 The mech isn't bad. I had it rebuilt, put it in the machine. When it didn't work, I pulled it out and had it tested and it was working. My thought is that the power supply is bad. Am I wrong? Link to comment Share on other sites More sharing options...
AZVendor Posted May 24, 2018 Share Posted May 24, 2018 Then it's a bad power supply. Let me know if you need one and I'll see if I have one to send you. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.