Magiccity726 Posted June 10, 2018 Share Posted June 10, 2018 Having a problem with this machine. The fan is not turning on. Neither is the compressor. However, I know my compressor works because it turns on when I plug into the wall. Could this be the fan motor, or could this be the coming from the outlet that you plug the compressor into? Thank you Link to comment Share on other sites More sharing options...
Magiccity726 Posted June 10, 2018 Author Share Posted June 10, 2018 Never mind. Door was open Link to comment Share on other sites More sharing options...
lacanteen Posted June 10, 2018 Share Posted June 10, 2018 There were 2 versions. HT2 used a manual control. Ht3 used a sensor & relay. You must have the newer version. Cheers Link to comment Share on other sites More sharing options...
Magiccity726 Posted June 10, 2018 Author Share Posted June 10, 2018 Also, When I unplug and plug back in, display says DN276E7. I try to scroll through to set the correct model number, but it is only giving me 276 options. Machine is a 501E HV/s11-12. What could I be doing wrong? Link to comment Share on other sites More sharing options...
orsd Posted June 10, 2018 Share Posted June 10, 2018 Reset the board and choose the right option. Link to comment Share on other sites More sharing options...
Magiccity726 Posted June 10, 2018 Author Share Posted June 10, 2018 12 minutes ago, orsd said: Reset the board and choose the right option. How would I reset the board? Link to comment Share on other sites More sharing options...
lacanteen Posted June 10, 2018 Share Posted June 10, 2018 remove the battery for a few minutes Link to comment Share on other sites More sharing options...
Magiccity726 Posted June 10, 2018 Author Share Posted June 10, 2018 57 minutes ago, lacanteen said: remove the battery for a few minutes Ok I removed battery and waited a few mins. Board was reset but I’m still not getting option of 501. It’s only giving me 276 options. Link to comment Share on other sites More sharing options...
lacanteen Posted June 10, 2018 Share Posted June 10, 2018 12 minutes ago, Magiccity726 said: Ok I removed battery and waited a few mins. Board was reset but I’m still not getting option of 501. It’s only giving me 276 options. Then it's only seeing 7 motors instead of 9. Probably have a bad switch or 2, or jammed columns. Link to comment Share on other sites More sharing options...
Magiccity726 Posted June 10, 2018 Author Share Posted June 10, 2018 8 minutes ago, lacanteen said: Then it's only seeing 7 motors instead of 9. Probably have a bad switch or 2, or jammed columns. Makes sense. I do have some jammed columns. Also, in order to dispense cans, do I need the rods for this machine? I know some of them don’t need them. Thank you Link to comment Share on other sites More sharing options...
Central Kentucky Vending Posted June 10, 2018 Share Posted June 10, 2018 yes got to have rods and a can shim Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now