Dracotheblack Posted June 21, 2018 Share Posted June 21, 2018 Hello all, I have been trying to convert a Dixie Narco DNCB 522 to bottles. the unit was set to cans before. I have set the back plate to the bottle length. I have tried both green/yellow and blue/yellow cams. the bottle stack side by side and not staggered. When the bottle holder cycles it catches. the next bottle and wedges between the side walls and the holder. What else do I need to do to get this unit to use the 16.9 oz bottles Thank you for the help Link to comment Share on other sites More sharing options...
AZVendor Posted June 21, 2018 Share Posted June 21, 2018 Cranems.com/parts-support/tech-publications. Go to the bottom of the page and move to the page that shows the 522 models. Link to comment Share on other sites More sharing options...
Dracotheblack Posted June 21, 2018 Author Share Posted June 21, 2018 ty. looking I cant find the 522mc/s listed but other 522 models are there. time to do some reading I guess and try to figure this out. Link to comment Share on other sites More sharing options...
AZVendor Posted June 22, 2018 Share Posted June 22, 2018 The MC (Magnum Circular) means you have a 522T. Link to comment Share on other sites More sharing options...
AngryChris Posted June 22, 2018 Share Posted June 22, 2018 3 hours ago, AZVendor said: The MC (Magnum Circular) means you have a 522T. I didn't know those actually existed Link to comment Share on other sites More sharing options...
Dracotheblack Posted June 22, 2018 Author Share Posted June 22, 2018 Thank you for that information. 522T then. Time to read and see what I need. Bought the machine at auction for dirt cheap ($16). Got an older model also but that is a different project. Link to comment Share on other sites More sharing options...
Dracotheblack Posted June 23, 2018 Author Share Posted June 23, 2018 Thank you all for the help. I final got it to work. I needed more shims in the column. I had the single shims (black in color). When I went to 3 on each side (1 inch total 1/5 inch to a side) shim total it vends great. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.