Gizmo Vending Posted July 13, 2018 Share Posted July 13, 2018 I recently obtained a Vendo 511 Univendor and I changed out one of the columns that was vending bottles to cans. Put in a can shim, changed the cam to the correct position but I get 1 dry vend, 1 dry vend and the 3rd vend dumps out 3 cans. What could cause this? Link to comment Share on other sites More sharing options...
allen watson Posted July 13, 2018 Share Posted July 13, 2018 Check your gauge bar, It’s up underneath where the cans are ready to drop into the shoot. For 12 ounce cans should be in the center slot. Also take the plastic clips off the bar that were used for the bottles. Link to comment Share on other sites More sharing options...
Corvus Corax Posted July 13, 2018 Share Posted July 13, 2018 Double check that the clips are not on backwards. Link to comment Share on other sites More sharing options...
AZVendor Posted July 14, 2018 Share Posted July 14, 2018 No clips on 511 gage bars. You only need to set its position correctly. Link to comment Share on other sites More sharing options...
Gizmo Vending Posted July 15, 2018 Author Share Posted July 15, 2018 Column did not even have the gauge bar. Works great now. Appreciate the advice. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.