Jump to content

Polyvend 453 configuration problem


terrygm

Recommended Posts

Hi,

I have a Polyvend 453 in my shop for refurb.

I can only get the fridge unit to start  when the machine is configured for "chilled cans" and temp is set to minimum possible.

Trouble is some of the spirals don't work in this configuration.

In the correct configuration (chilled snacks)  I cant get the fridge unit to start even at the lowest temperature setting.

Is this normal behaviour?

Thanks

Link to comment
Share on other sites

 A simple google machine search found this: http://www.univendingmexico.com/archivos-clientes/Manual-GPL.pdf

Here is the parts manual, though you probably can't get any parts for it: https://na.suzohapp.com/pdf/vending-manuals/gpl/SnackVendorModels452-453PartsManual.pdf

It seems that this was maybe an export machine only so you may not find anyone on these boards that has used one.  You'll notice that the parts manual is from an source in England and the operating manual is from Mexico.

Link to comment
Share on other sites

From what i gathered, it's a shallow, 4-wide snack based off of a GPL 159 (national 157 ?) and 230v, so i assume you are not in the US.  It also appears that the 453 was not a stock refrigerated machine (based off of described shipping weight) but the refrigeration may have been an optional add-on and should show up on the bottom of the cabinet near the hinge.

Aside from what AZ said, your only luck may be to try to convert it to a National machine by possibly changing the entire keypad assembly.  However, i don't know if that works if this is a 230v machine.  I literally have no idea if the machine is running 110v inside or 230v or if a national conversion is possible at all.  If you did convert it though, you would be good to go.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...