WhiteRoom Posted October 19, 2018 Share Posted October 19, 2018 I was doing to some work on one of my 5591s and noticed a bit of water under it. I've had this happen with another 5591 and it was just the air intakes under the delivery bin being clogged with lint/dust/junk. After cleaning that up, I checked behind the machine and saw that only one of the two fans was running. I've never checked before, so I don't know if that is normal or if both fans always run together? Link to comment Share on other sites More sharing options...
AZVendor Posted October 20, 2018 Share Posted October 20, 2018 Both fans run at the same time because you have two condensers. You need to replace it so it cools properly. Link to comment Share on other sites More sharing options...
WhiteRoom Posted October 28, 2018 Author Share Posted October 28, 2018 I replaced the condenser fan motor that was not working, but it is still not spinning. I ran out of time to keep working on it, I suppose the new motor could be bad or I didn't get the wiring tight enough, which I will go back and check. Just wondering if there are any other relays or fuses that would keep that one fan off? Thanks for any further help! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.