google.com, pub-6262331124919164, DIRECT, f08c47fec0942fa0 Jump to content
Eric Kamta

How to change from a 2row column to a 3row column in a Vendo 511

Recommended Posts

Hello,

I have a vendo 511 and one of the columns sells Monster and it takes 2 cans.

Due to slow sales, I want to change that to regular pop and that column can take 3 cans. 

When I removed all the Monster and put the regular cans and increased the length of the column, the machine will spit out 2 cans on the first purchase then 1 can after. But I need it to spit out 1 can at a time.

So how can I reset it so that it recognizes I have 3 cans and needs to spit out 1 at a time?

Share this post


Link to post
Share on other sites

Adjust your motor cam to show three notches in it. 

Share this post


Link to post
Share on other sites

AZVendor,

Thanks for your response.

Please can you tell me how to adjust the motor cam?

Sorry, I am fairly new in the business and this is a new location I just acquired.

 

Thanks

Share this post


Link to post
Share on other sites

You are VERY new if you don't know how to do this yet.  On each motor you will see plastic timing cams with a front narrow cam in front of a rear full disk.  Where you see three holes in the wider end of the narrow cam you will flex it away from the rear cam and adjust it to the hole that will expose three notches in the rear cam at the narrow end of the front adjustable cam.

Share this post


Link to post
Share on other sites

Yes I am very new, about 1 year into the business.

Thanks for your response, I will try it and let you know how it goes.

Share this post


Link to post
Share on other sites

I was also wondering if there is another way/step to do this. I had some trouble when emptying the column last time. I had to reach down and remove the cans from the tray that was curved downwards and when refilling, I was not sure whether to refill from inside the tray (still curved downwards) or above the tray, if above the tray, how do I make it rotate after refilling?

I saw the previous owner do something like that. He emptied the columns (curved tray still facing down), then filled it back with the new cans, then pressed some buttons on the machine that made the curved tray to rotate and refill with cans so that it is ready for vending. 

He left the country, so I can't contact him for help.

Your help will be greatly appreciated.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...