EddieMac Posted March 12, 2019 Share Posted March 12, 2019 Good Day, I have 2 USI 3129-L snack machines that both have a MAKA 27v validator in them. I need to replace the validators with something newer. I just pulled them and want to do this before putting them back out on the route. Other than sometimes not taking dollars they both work fine and still look good. I did one a few years ago, but I can't remember where I got the validator and harness. I think I used a VN2512 maybe. Does anyone here have 2 validators and the proper harness for sale or know who to buy from? Link to comment Share on other sites More sharing options...
AZVendor Posted March 13, 2019 Share Posted March 13, 2019 That is an HR32 with an F80 board. The parts manual shows that it came with a MDB validator so if that is true then all you need is a VN2512 validator and it's MDB harness to plug into your machine. If the machine is MDB now then the coin mech has a small 6 pin plug that plugs into the validator harness. Link to comment Share on other sites More sharing options...
EddieMac Posted March 16, 2019 Author Share Posted March 16, 2019 They are not MDB. They both have the MAKA 27v validators in them. I just need to know which validator to replace the MAKA with, and what harness I need for it. Link to comment Share on other sites More sharing options...
AZVendor Posted March 16, 2019 Share Posted March 16, 2019 If you don't have MDB then you need to use a VN2512 with a VFM mask, no flashing mask. See if this one might work for you: https://www.dsvendinginc.com/p-2285-d8811-0-conversion-harness-maka-to-mars.aspx Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.