Check out this tattoo machine doing 2 for 1 - How do you do it?

[nam]

 

Check out the picture on the left and see the column that says two for one.  It doesn't 25 cents.  It says 2 for 1 like the machine is gonna vend two cards at once!  Anybody know how to do this?  I like that better than selling a mystery mix at a quarter.  You only get just a quarter.  Doing 2 for 1 you get 50 cents.  See my point?  I just don't know how to make my machines vend two cards at the same time.

The machines in the pictures are for sale if you like to think BIG!  Check out the ad under Kannapolis, NC in craigslist.  This person is selling 300 4 column Brand machines on H stands!  The price is only $194 each.  For only a few thousand you could be the star of the show with sticker/tattoo machines.  This should be some serious income from these babies.

nam

 

 

 

 

 

[statik27]

I don't have one of these myself, but couldn't you just put two stickers in the same card? It'd be worth a try anyway.

statik

PS: thanx for answering my question the regulations thread nam!

[nam]

That would probably work and may well be what this person is doing. It would be a bit time consuming dealing with 300 machines and trying to open and combine that many cards though. I was hoping the machine could some how be set up to vend two cars at once. Then you could just drop them in the columns and go.

Very good thinking on your part and bet you are right on how he is doing it too. No problem on the reg. thread answer. Wish it would have been someone from Cali giving you more specific answers for your area.

nam

[kai1836]

He probably puts two tattoos or stickers in each sleave.

[dperry]

Wouldn't two tattoos in the sleeve make it to thick to vend?.

[nam]

Darryl,

The tattoos are so thin I don't it would matter if two were in the same card. But then I'm not positive here which is my reason for posting this. Two cards are not going to work either unless there is something I don't know about adjusting these mechs.

nam

[dperry]

Right. This may only work with tattoos. I hafta wonder if stickers aren't thicker than tattoos and would cause problems if doubled-up.

[shvend]

There are two tattoos in the card. That is how I do it when I run these kinds of specials

[shvend]

Darryl,

The tattoos are so thin I don't it would matter if two were in the same card. But then I'm not positive here which is my reason for posting this. Two cards are not going to work either unless there is something I don't know about adjusting these mechs.

nam

 You can adjust the mechs as far as the vend price, but you would have to adjust the column to vend more than one card.  I'm pretty sure that will not help you vend multiple cards because the slid that pulls the cards through the column is only designed to pull one card.  But opening up the adjustment at the bottom of the column will alow thicker cards to come thorugh.

[markvend]

Hey, this is a great idea to move some junk tattoos I need to get rid of (even if a little time consuming). Thanks for the idea.

Mark