SM VI 3159 lock mechanism

[69crewcab]

Just picked up A 3159 snack machine for my work but the lock was drilled out

so all I have is the spring loaded bar to lock the door , but no idea how to attach it to the T handle lock obce I buy it??

[lacanteen]

Upload a picture. Not sure what you're asking. 

[cvending]

The spring loaded bar attaches to the T-handle. there is a e-clip on the shaft that prevents it from pulling all the way out through the front. You need to remove that clip and spring & washer, then pull the shaft out through the front of the door.  At the top of the shaft there should be a little sleeve that goes through the end of the shaft. That is what holds it into the t-handle. You need to play with it and slip it into the t-Hhandle. Then re-insert into machine. Slip the spring& washer over the threads and pull the shaft through the frame until you can see the notch on the shaft where the e-ring locks in to. 

[69crewcab]

Anyone have a picture? I don’t have any of that 

just the bar and spring

i ordered a t handle lock

but I need that clip washer etc

[69crewcab]

Anyone have a picture? I don’t have any of that 

just the bar and spring

i ordered a t handle lock

but I need that clip washer etc

 

will get a pic tomm at work

[cvending]

Go the www.vendnetusa.com and look up the parts manual. You can order right from that site

[cvending]

Just to be sure, this is a USI  rand machine isn’t it?

[69crewcab]

FSI it states on the sticker 

see pic