Apple Leisure Posted August 7, 2019 Share Posted August 7, 2019 This has happened 4 or 5 times in a row now, on periodic service dates. I find a flashing decimal, and it's the number 1 column every time; it says "Try another selection" when you push the select switch. I open the door, and push the 'door close' switch a couple of times until it vends a can from column 1 and everything is back to normal. I check the RD, it's usually a small number but can be up to 20 vends since last time. Link to comment Share on other sites More sharing options...
AZVendor Posted August 7, 2019 Share Posted August 7, 2019 Replace the motor switch. If that fails to remedy the issue then your column is probably worn and deformed from years of use, causing poor vending. You can try a brand new, not used, motor but the column itself actually deforms from the weight and causes vending problems when loaded full. Replacing the oscillator bar and bushings won't help in these cases, only keeping the column lower will help. Link to comment Share on other sites More sharing options...
Apple Leisure Posted August 8, 2019 Author Share Posted August 8, 2019 Thanks. I replaced that switch today; we will see if that does the trick. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now