google.com, pub-6262331124919164, DIRECT, f08c47fec0942fa0 Jump to content
Drcpwen

Genesis Go 380 Bill Validator Issue

Recommended Posts

I'm having a problem with my Genesis go 380 Bill validator. I just purchased a refurbished one from Capital Vending. It's a ICT DC 12 volt pulse. The model number is A6-II.  It accepts some Bills but eventually fails with a three flashing LED light code which is sensor failure.  It failed one time after only 3 bills and it's accepted as many as seventy before failing. Is it a problem with the validator or possibly my dip switch configuration? I currently have the dip switches all turn to off except for number 7 is on.  I'm not at all familiar with these pulse validators.

I also have a brand new ICT DC 12 volt pulse model number L70-US600i.  It does not accept any bills and is flashing twice where you put the bill in. That error code is "disable".  This unit has two sets of dip switches. One of them is a 10-count switch and all of the switches are in the off position except for 5 6 and 7. It has another four position dip switch and all of them are in the off position.

Can anyone help me get either one of these validator is working?

Thanks in advance.

Danny

Share this post


Link to post
Share on other sites

I forgot to mention that the A6-II credits the machine $1.00 when powering up then accepts Bill's until the three LED flash error code happens.  I'm not sure if that helps.

 

Share this post


Link to post
Share on other sites

This hasn't convinced you yet that Genesis machines belong in a scrap yard?  Keep on beating that dead horse.

  • Like 1

Share this post


Link to post
Share on other sites

I would do what most people do, use the Genesis until it starts screwing up, then replace it with an AP, AMS, National, Wittern, ...

Share this post


Link to post
Share on other sites
On 12/1/2019 at 6:43 PM, Corvus Corax said:

I would do what most people do, use the Genesis until it starts screwing up, then replace it with an AP, AMS, National, Wittern, ...

I need a machine that's 30 inches wide or less.  Can you recommend a brand and model that fits those specs?  Thenl only reason why I bought the Genesis is becuase it met that requirement.   I usually stick to DN, USI and Royal.  This is my only combo.

Share this post


Link to post
Share on other sites

USI or AMS 3-wide machines are about 29" wide.

Share this post


Link to post
Share on other sites

If you can find a refrigerated 3-wide (USI or AMS) and set it up to sell cans/bottles then you could try that.  Why do you need a combo for such a small space though??  It would have to be a killer location for me to stress over such a space constraint.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...